We noticed you’re blocking ads

Thanks for visiting CollaborativeEYE. Our advertisers are important supporters of this site, and content cannot be accessed if ad-blocking software is activated.

In order to avoid adverse performance issues with this site, please white list https://collaborativeeye.com in your ad blocker then refresh this page.

Need help? Click here for instructions.

X

You are now leaving Collaborative EYE and will be taken to www.evolvemeded.com

Supplement | Editorially independent content supported with advertising by

Toric IOL Selection

Tips for success with these premium lenses.

Cataract surgery has become a refractive procedure, which means that ophthalmologists must address astigmatism to achieve satisfactory results. More than 0.50 D of residual astigmatism is visually significant and can result in ghosting and shadows.1

Before considering astigmatic correction, I perform a qualitative assessment of the corneal surface using topography and a slit-lamp examination. Does the patient have irregular astigmatism, keratoconus, or subtle corneal pathology such as epithelial basement membrane dystrophy? Once I am sure the patient has true corneal astigmatism, I review results from two topographers that can measure anterior and posterior astigmatism as well as perform optical biometry to make sure the magnitude and meridian match among devices (within 0.50 D and 10º, respectively). If there is a big difference between the biometer and the topographers, for example, I consider treating the astigmatism postoperatively.

When picking toricity and the alignment meridian, I use the Baylor Nomogram as well as the IOL manufacturer’s online calculator. The data I enter are an average of the measurements obtained with the two topographers and the optical biometer I used, typically the Galilei Dual Scheimpflug Analyzer (Ziemer Ophthalmic Systems), Cassini (i-Optics), and IOLMaster 700 (Carl Zeiss Meditec). Surgeons without all of these tools can still use toric IOLs effectively. Placing a toric IOL based on consistent astigmatism measurements between a topographer and biometer using manual markings can produce excellent refractive outcomes.

I recommend toric IOLs for patients with as little as 0.80 D of against-the-rule (ATR) astigmatism, especially if they have a high amount of posterior corneal astigmatism. I also favor a toric IOL if the patient has 1.00 D or more of with-the-rule (WTR) astigmatism. I use a 2.4-mm incision, which results in minimal surgically induced astigmatism.2 Patients who have chosen a multifocal or extended depth of focus IOL should also have their astigmatism corrected to decrease the risk of blurry vision, glare, and halos.

In the United States, the main toric platforms are the Tecnis Toric IOL (ZCT line, Johnson & Johnson Vision [J&J Vision]) and the AcrySof IQ Toric IOL (SN6AT line, Alcon). Combining presbyopic and astigmatic correction are the Tecnis Symfony Toric IOL (J&J Vision), the AcrySof IQ Restor +2.5 D Multifocal Toric IOL with Activefocus optical design (Alcon), the AcrySof IQ Restor +3.0 D Multifocal Toric IOL (Alcon), and the Trulign Toric IOL (Bausch + Lomb). I have experience with the platforms from J&J Vision and Alcon, and both are excellent for correcting astigmatism. Data show that Alcon’s platform rotates less than J&J Vision’s.3,4

CASE EXAMPLE

A 66-year-old man presented with decreased vision, glare, and halos that were affecting his ability to drive at night. A slit-lamp examination showed a 2+ nuclear sclerotic cataract, but the rest of the anterior segment and posterior segment examination was normal. There were no signs of dry eye disease. Placido ring topography showed crisp rings and no sign of epitheliopathy.

The patient had significant astigmatism on manifest refraction, both topography devices, and the biometer, and it was similar in magnitude and meridian on all devices (Figures 1 and 2). Using the magnitude and meridian of astigmatism from the Lenstar (Lenstar), I entered preoperative data into the Baylor nomogram and the Alcon online toric calculator, which incorporates the Barrett calculator. Both nomograms recommended a 17.00 D model SN6AT8 AcrySof IQ Toric IOL (Alcon) to minimize ATR astigmatism without flipping the axis. Given the ATR shift in astigmatism with age, I left the patient with a little WTR astigmatism.

Figure 1. The Galilei Dual Scheimpflug Analyzer showed the magnitude and meridian of astigmatism in the patient’s left eye.

Figure 2. The Lenstar biometer showed the magnitude and meridian of astigmatism in the patient’s left eye.

In the preoperative area, I manually marked the 3-, 6-, and 9-o’clock axes on the eye. Next, I used the Catalys Precision Laser System (J&J Vision) to place two 10º intrastromal marks at the intended meridian, create the anterior capsulotomy, and soften the nucleus.

In the OR, after removing the cataract and cortex and filling the bag with an OVD, I performed intraoperative aberrometry (ORA System, Alcon), which confirmed the chosen toric IOL and axis. I implanted the IOL and oriented it to the intended axis with bimanual irrigation and aspiration.

Three weeks after surgery, the patient’s UCVA measured 20/20 with a manifest refraction of -0.50 D and no residual astigmatism. He was very happy with the result.

TAKE-HOME POINTS

  • Patients who have regular astigmatism and no corneal pathology are candidates for toric IOLs.
  • If the patient will receive a premium IOL, it is critical that he or she understand the reason for the price. Particularly helpful, in my experience, are brochures that display simulated images of vision after cataract removal with and without astigmatic correction. Eye models and color topography are also excellent educational tools.
  • I usually aim for as little residual postoperative corneal astigmatism as possible. The anterior steep corneal meridian typically shifts toward a horizontal orientation over time, whereas the orientation of the posterior steep meridian remains vertical despite advancing age. As studies have shown, the anterior cornea tends to develop ATR astigmatism with age, whereas the posterior cornea in most eyes displays ATR astigmatism irrespective of age.5 For younger patients, I therefore target a little (< 0.25 D) WTR astigmatism.
  • Optimal outcomes depend on the proper level of toric correction, accurate alignment, and rotational stability of toric IOLs. Three areas for potential error with a toric IOL are reference marking, marking the alignment axis, and alignment of the actual IOL. In the preoperative holding area, it is important to mark 3, 6, and 9 o’clock on the eye for the reference axis because ocular alignment can vary by more than 10º in 8% of patients when they move from an upright to a supine position.6 The next step is to make the correct alignment mark intraoperatively, either manually (bubble markers, graduated markers, etc.) or using an automated system (Verion Image Guided System, Alcon; Callisto Eye, Carl Zeiss Meditec; TrueGuide, TrueVision). Third, I typically align the toric IOL 10º shy of the axis initially. I use bimanual irrigation and aspiration to remove the OVD while keeping the IOL stable with the aspirator. With a Sinskey hook, I rotate the IOL to the correct axis and then hydrate the incision prior to removing the irrigator to keep the IOL from rotating. Intraoperative aberrometry can also assist with IOL toricity and alignment.
  • Despite diligence and attention to detail, a surgeon will encounter the occasional refractive surprise. In these cases, evaluating outcomes and considering them objectively will sharpen his or her skill set.
  1. Villegas EA, Alcón E, Artal P. Minimum amount of astigmatism that should be corrected. J Cataract Refract Surg. 2014;40(1):13-19.
  2. Montes de Oca I, Khandelwal SS, Al-Mohtaseb Z, et al. Long-term surgically induced astigmatism after cataract surgery. Paper presented at: ASCRS/ASOA Congress & Symposium; May 6-10, 2016; New Orleans, LA
  3. Potvin R, Kramer BA, Hardten DR, Berdahl JP. Toric intraocular lens orientation and residual refractive astigmatism: an analysis. Clin Ophthalmol. 2016;10:1829-1836.
  4. Lee BS, Chang DF. Comparison of the rotational stability of two toric intraocular lenses in 1273 consecutive eyes [published online ahead of print March 12, 2018]. Ophthalmology. doi:10.1016/j.ophtha.2018.02.012.
  5. Ho JD, Liou SW, Tsai RJ, Tsai CY. Effects of aging on anterior and posterior corneal astigmatism. Cornea. 2010;29(6):632-637.
  6. Smith EM Jr, Talamo JH. Cyclotorsion in the seated and supine patient. J Cataract Refract Surg. 1995;21(4):402-403.
author
Zaina Al-Mohtaseb, MD
  • Assistant Professor of Ophthalmology and Associate Residency Program Director, Baylor College of Medicine, Houston
  • Cornea, cataract, and refractive surgery, Baylor College of Medicine, Houston
  • zaina@bcm.edu; Twitter @Zaina_1225
  • Financial disclosure: Consultant (Alcon, Bausch + Lomb, Carl Zeiss Meditec); Research funding (Johnson & Johnson Vision)

NEXT IN THIS ISSUE